Our offices and warehouses will be closed for the holidays from December 23 to January 6.
Our e-commerce will remain active and orders will be processed upon reopening. Happy Holidays!

COMPLETE CATALOGUE EXPANSION PLUGS EXPANSION CAPS 14 Items

DRAWINGS

HP plugs are designed to fit holes with a total diameter tolerance of -O / + 01 mm. This tolerance is achieved by a simple drilling operation.

HP plugs are made in one piece for quick and easy installation. Simply push the steel ball into the sleeve, allowing the sleeve to expand; the grooves press into the material in the surrounding hole, providing a reliable, anchorable seal of up to 270Mpa.

These simple instructions must be followed when installing HP expansion plugs:
1.Drill the installation hole to the recommended diameter with a normal drilling operation. Additional reaming is NOT NECESSARY
2.Check the installation hole with the correct depth, diameter and verify that it is free of cutting oil, grease and machining residues
3.Place an HP expansion plug in the hole so that it touches the bottom
4.Using the correct installation tool, press the HP plug into the hole. The ball must be pressed into the sleeve below or flush with the edge. The correct tolerance is O/ -0.25 mm
5.Fixed or portable pneumatic or hydraulic tools can be used for serial production
6.HP expansion plugs provide reliable performance and high pressure resistance. Periodic pressure tests must be carried out to verify that installation is correctly executed

Contact our technical department for further assistance

EXPANSION CAPS YOU CAN REPLACE IT WITH:

Order by:

Avail.:

Brand:

Special Price:

Attention! Bags containing 100 pieces!

Description	Dimensions(mm)	Material	Avail. (UN)
TAPPI ESPANSIONE HC 3x4,7 100PZ 05.TAES0.HP0003BUS Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø3 d.121x10,3 - 05.PNCVT.S03000	0,00 - 3,00 - 0,00 chiudi	-	50 x 100PZ
TAPPI ESPANSIONE HC 4x5,1 100PZ 05.TAES0.HP0004BUS Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø4 d.127,15x10 - 05.PNCVT.S04000	0,00 - 4,00 - 0,00 chiudi	Steel	201 x 100PZ
TAPPI ESPANSIONE HC 5x7,1 100PZ 05.TAES0.HP0005BUS Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø5 d.121x10,3 - 05.PNCVT.S05000	0,00 - 5,00 - 0,00 chiudi	Steel	172 x 100PZ
TAPPI ESPANSIONE HC 6x8,6 100PZ 05.TAES0.HP0006BUS Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø6 d.121x10,3 - 05.PNCVT.S06000	0,00 - 6,00 - 0,00 chiudi	Steel	168 x 100PZ
TAPPI ESPANSIONE HC 7x10,1 100PZ 05.TAES0.HP0007BUS Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø7 d.121x10,3 - 05.PNCVT.S07000	0,00 - 7,00 - 0,00 chiudi	Steel	155 x 100PZ
TAPPI ESPANSIONE HC 8x11,6 05.TAES0.HP0008 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø8 d.124,5x14 - 05.PNCVT.S08000	0,00 - 8,00 - 0,00 chiudi	Steel	5.725
TAPPI ESPANSIONE HC 9x13,5 05.TAES0.HP0009 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø9 d.124,5x14 - 05.PNCVT.S09000	0,00 - 9,00 - 0,00 chiudi	Steel	1.500
TAPPI ESPANSIONE HC 10x15,1 05.TAES0.HP0010 Complete it with (not included): PUNZONE MANUALE+INSERTO REMOVIBILE PER TAPPO Ø10 - 05.PNCVT.S10000	0,00 - 10,00 - 0,00 chiudi	Steel	1.592
TAPPI ESPANSIONE HC 12x17,8 05.TAES0.HP0012 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø12 d.124,5x14 - 05.PNCVT.S12000	0,00 - 12,00 - 0,00 chiudi	Steel	50
TAPPI ESPANSIONE HC 14x20,4 05.TAES0.HP0014 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø14 d.128x16 - 05.PNCVT.S14000	0,00 - 14,00 - 0,00 chiudi	Steel	9
TAPPI ESPANSIONE HC 16x23,4 05.TAES0.HP0016 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø16 d.128x16 - 05.PNCVT.S16000	0,00 - 16,00 - 0,00 chiudi	Steel	-
TAPPI ESPANSIONE HC 18x26,3 05.TAES0.HP0018 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø18 d.128x20 - 05.PNCVT.S18000	0,00 - 18,00 - 0,00 chiudi	Steel	-
TAPPI ESPANSIONE HC 20x30 05.TAES0.HP0020 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø20 d.128x25 - 05.PNCVT.S20000	0,00 - 20,00 - 0,00 chiudi	Steel	-
TAPPI ESPANSIONE HC 22x34 05.TAES0.HP0022 Complete it with (not included): PUNZONE MANUALE PER TAPPO Ø22 d.128x25 - 05.PNCVT.S22000	0,00 - 22,00 - 0,00 chiudi	Steel	-